Vol 6 No 6 (2014): Mechanics, material science, industrial engineering and management / Mechanika, medžiagų inžinerija, pramonės inžinerija ir vadyba

Published: 2015-03-05

Article

Analysis of a mechanical structure of a microscope sensor of atomic force

Andrius Dzedzickis, Vytautas Bučinskas
Abstract 315 | PDF Downloads 360 | DOI

Page 589-594

Research on the influence of the properties of intervertebral disc stiffness of the lumbar spine on the displacement of veretbrae

Artūras Linkel, Julius Griškevičius, Gintaras Jonaitis
Abstract 305 | PDF Downloads 463 | DOI

Page 595-597

Investigation into plastic cards

Neringa Stašelytė, Nikolaj Šešok, Igor Iljin
Abstract 279 | PDF Downloads 173 | DOI

Page 598-602

Research on the dynamics of the precision angle calibration system

Artūras Kilikevičius, Vytautas Makarskas, Valdemar Prokopovič
Abstract 284 | PDF Downloads 129 | DOI

Page 603-606

Research on the hysteresis effect on positioning the system with flexible elements

Audrius Čereška, Giedrius Augustinavičius
Abstract 297 | PDF Downloads 165 | DOI

Page 607-611

Research on cutting crystals soluble in water

Rimantas Vilkelis, Mindaugas Jurevičius
Abstract 304 | PDF Downloads 158 | DOI

Page 617-620

Research of plasma spraying of the ZRO2 – Y2O3 electrolyte coatings

Oleg Devoino, Vasily Okovity
Abstract 274 | PDF Downloads 184 | DOI

Page 621-625

Research on transverse acetabular fracture fixation using different plate attachment methods

Gediminas Gaidulis, Julius Griškevičius, Valentinas Uvarovas, Igoris Šatkauskas
Abstract 303 | PDF Downloads 627 | DOI

Page 626-629

Investigation into the friction and roughness properties of prints using conventional and UV inks

Giedrė Giraitytė, Jonas Sidaravičius
Abstract 288 | PDF Downloads 173 | DOI

Page 630-633

Friction properties of inkjet and flexographic prints on different papers

Simona Grigaliūnienė, Vaida Burkauskaitė, Aura Kuodė, Jonas Sidaravičius, Vytautas Turla
Abstract 291 | PDF Downloads 162 | DOI

Page 634-639

Research of technological characteristics of dispersed molding materials

Vitaliy Kulikov, Svetlana Kvon, Elena Serbakova, Tatyana Kovaleva
Abstract 287 | PDF Downloads 145 | DOI

Page 640-642

Computer-based measurement kit for welding deformations

Darius Dačkauskas, Nikolaj Višniakov
Abstract 283 | PDF Downloads 183 | DOI

Page 643-647

Research of the resistance of contact welding joint of R65 type rail

Kęstutis Dauskurdis, Vitalijus Rudzinskas
Abstract 346 | PDF Downloads 224 | DOI

Page 648-653

Analysis of scaffold materials of implant and tissue regeneration

Deividas Mizeras, Algirdas Vaclovas Valiulis, Andžela Šešok, Julius Griškevičius
Abstract 311 | PDF Downloads 540 | DOI

Page 654-660

Research on laser micro polishing of sls technology sintered iron-based powder surface

Gerda Vaitkūnaitė, Vladislav Markovič, Olegas Černašėjus
Abstract 300 | PDF Downloads 171 | DOI

Page 661-665

Research on the plasma spray process applying the finite element method

Raimonda Lukauskaitė, Jonas Garjonis, Olegas Černašėjus
Abstract 325 | PDF Downloads 156 | DOI

Page 666-671

Research on the rectilinear motion system of the gantry module

Neringa Burbaitė, Gintas Viselga, Algirdas Jasinskas
Abstract 289 | PDF Downloads 133 | DOI

Page 672-675

Piezoelectric systems as an alternative energy source

Andrius Čeponis, Dalius Mažeika
Abstract 315 | PDF Downloads 234 | DOI

Page 676-681

The application of spherical harmonics for describing a cube-shape particle

Urtė Radvilaitė
Abstract 287 | PDF Downloads 155 | DOI

Page 682-685